Performance; General Specifications - Mitsubishi 900 Series User Manual

3

PERFORMANCE

3.1 General Specifications

The general specifications of the GOT are indicated below.
Item
Operating ambient
temperature
Other than display section
Storage ambient
temperature
Operating ambient
humidity
Storage ambient
humidity
Conforms
Vibration to JIS B3502 and
resistance
Shock resistance
Operating
atmosphere *3
Operating altitude
Installation site
Overvoltage category *1
Contamination level *2
*1 Indicates the element in the distribution system between the public electricity grid and the mechanical equipment
inside the premises that the relevant device is assumed to be connected to.
Category II applies to devices such as those that draw their power supply from fixed installations.
The surge voltage withstand capability of devices with ratings up to 300V is 2,500V.
*2 This index gives a measure of the incidence of conductive materials in the environment in which the device is used.
A contamination level of 2 indicates an environment in which there is only contamination by non-conducting
materials, but due to occasional condensation, conductivity may occur.
*3 Please do not use or store GOT in an environment with atmospheric pressure greater than the atmospheric
pressure at sea level (0m).
There is a possibility errors may occur if this point is not observed.
Display section
In case of
intermittent
vibration
IEC
In case of
61131-2
continuous
vibration
Conforms to JIS B3502, IEC 61131-2 (147 m/s
Specifications
A95*GOT: 0 to 40
A956WGOT: 0 to 55
0 to 55
-20 to 60
10 to 90 % RH, non-condensing
10 to 90 % RH, non-condensing
Frequency Acceleration
10 to 57 Hz ---
57 to 150 Hz 9.8 m/s2
10 to 57 Hz ---
57 to 150 Hz 4.9 m/s2
2
, 3 times in each of X, Y and Z directions)
No corrosive gas
2000 m(6562 ft) max.
Inside control box
II or less
2 or less
3.1 General Specifications
Amplitude Sweep Count
0.075 mm
10 times in each
---
of X, Y and Z
directions (for 80
0.035 mm
minutes)
---
3 - 1
1
2
3
4
5
6
7
8