Table of Contents
Advertisement
(2) How to express keys and key operation descriptions
The keys for the MELSEC-A list editor and operation procedures are described in text in a
simplified manner as shown below.
(a) Some keys, such as
Operate such keys with either the upper or lower function indicated on them valid according to
the operation. In descriptions, only the necessary functions are indicated on keys.
(Example of description)
When entering the character "M," the
Make upper or lower functions valid by using the
information about the procedure for making upper or lower functions valid, see the following:
Subsection 14.3.8 Switching valid keys (upper/lower functions)
(b) The expression
order.
(Example of description)
The example of description shown below indicates that
second,
third, and
0
SET
RST
and
MOV
, are available for two different purposes.
0
M
...
Key 1
Key 2
finally.
GO
F
0
R
SP
K
MOV
key is indicated as
M
M
key or the
SHIFT
means touching keys from
Key n
must be touched first,
SET
5
GO
14.3 MELSEC-A List Editor
14.3.6 Operation methods
in the description.
key.For further
SET
to
in
Key n
Key 1
F
14 - 59
9
10
11
12
13
14
15
16
Advertisement
Table of Contents
Troubleshooting
