Mitsubishi GT11 User Manual page 101

Item
OS information
Project Information
Alarm information
Memory card format
Memory information
GOT data package acquisition
System monitor
Debug
A List editor
FX list editor
Memory check
Drawing check
Font check
Self check
Touch panel
checking
I/O check
System alarm display
GOT start time
Clean
*1: Perform the following with the drawing software.
• Installing the communication driver
• Downloading the project data with communication settings (channel number and communication driver
assignment)
*2: Selectable languages vary, depending on the standard fonts that are installed.
*3: It is necessary to set the security level with drawing software.
*4: It is necessary to install the RS-232 connector for test. (Section 14.10 I/O Check)
Installing OS.
Uploading OS.
Property display of OS. (Kind, version, and date)
Data check of system file. (OS)
Downloading project file.
Uploading project file.
Project file deleting.
Copying project file. (A drive
Property display of project file. (Date, version and screen title)
Data check of project file.
Deleting alarm log file.
Copying alarm log file.
Formatting of CF card and Internal SRAM
Display of free memory space in GOT
Copies the OS and project data to the memory card
Device monitor of PLC, Test function, Present value change of the buffer memory
monitor and the buffer memory of intelligent module
Sequence program and parameter change of ACPU
Sequence program and parameter change of FX PLC
A drive memory check (Standard CF card)
C drive memory check (Built-in flash memory)
Missing bits, color, draw, display and overlap display check of liquid crystal
Installed fonts check
Touch panel operation check
Connected target confirmation
*4
Self-loopback check
Displaying GOT errors, CPU errors, network errors
Resetting GOT errors
Displaying GOT start date and time, current time, accumulated operating hours
Display the screen to clean the display section.
Functions overview
A drive)
9.2 Utility Function List
9
10
11
12
13
14
15
16
9 - 3