Mitsubishi GT11 User Manual page 191

(2) When the GOT is connected to a QnACPU
Function
Name Description
Monitoring present values by
Entry
entering devices to be monitored
monitor
in advance
Monitoring the present value of n
Batch monitor
devices from a specified device
Monitoring the present value, set
TC monitor value, contact point, and coil of m
devices from a specified device
Monitoring the present value of x
devices in specified buffer memory
BM monitor
of a specified intelligent function
module
Setting/Resetting bit devices
Changing the present value of
word devices and buffer memory
Data
change by test
Changing the present value of TC
operation
(possible during TC monitoring)
Changing the set value of TC
(possible during TC monitoring)
Changing device values by
Quick test
performing a quick test
Displaying device comments
Displaying word device and buffer
Display switching
memory values in decimal or
hexadecimal
*1 The present value of Z cannot be changed. None of the connection forms supports V.
*2 When the GOT is connected to a QnACPU whose date shown on the rating plate is earlier than 9707B, device
comments cannot be displayed.
*3 Indicates CC-Link connection (via G4).
Connection type between GOT and controller
Bus Direct CPU Computer link
connection connection connection
2
2
* *
( : Available, : Partly restricted,
CC-Link
GOT multidrop
connection
connection
*3
G4
1
*
2
*
14.2 System Monitor
14.2.1 Specifications
9
: Unavailable)
Reference
10
Subsection 14.2.10
Subsection 14.2.14
Subsection 14.2.17
11
Subsection 14.2.21
Subsection 14.2.24
12
Subsection 14.2.8
Subsection 14.2.7
13
14
15
16
14 - 7