Mitsubishi GT11 User Manual page 346

(2) Error code and reference manual
Error source
CPU
GOT
CPU
Servo
amplifier
*1
*2
18 - 2 18.1 Error Contents Display
Error code
0 to 99
(Value of D9008)
100 to 299
300 to 399
400 to 499
500 to 699
1000 to 10000
(Value of SD0)
20016 to 20237
*2
The assigned error code for FXPLC is 100 to 109, which displays the status of M8060 to M8069.
(Example) When the error code (100) error occurs, correct the error according to the M8060 description.
The error code displayed on GOT is calculated by changing the error code displayed on the servo amplifier to a
decimal number and adding "20000" to it.
For this reason, to refer to the manual of the servo amplifier based on the error code displayed upon a system
alarm caused to the GOT, subtract the error code by "20000" and convert the lower three digits into a
hexadecimal.
(Example: If the system alarm displayed at GOT is "20144," the error code of the servo amplifier is: 20144 -
20000 = 144 (BIN) = 90 (HEX).
Contents
Error code of CPU (for ACPU)
Error code of CPU
*1
• FX PLC
• Third party PLC
• Temperature controller
(OMRON temperature
controller only)
Error code of the GOT main unit
function
Error code of the GOT
communication function
Error code of the GOT main unit
function
Error code of CPU
(for QCPU, QnACPU)
Error code of servo amplifier
Reference
User's manual of the ACPU
connected with GOT
User's manual of the FXCPU to
which GOT is connected
If a third-party PLC is connected,
take actions referring to the error
message.
Section 18.2
User's manual of the QCPU and
QnACPU connected with GOT
User's manual of the servo
amplifier connected to GOT