Setting The Software Switches - Kyocera Fax System L Service Manual

Maintenance
item No.
U882

Setting the software switches

Description
Sets the software switches on the fax control PCB individually.
Purpose
Use to change the setting when a problem such as split output of received originals occurs. Since the
communication performance is largely affected, normally this setting need not be changed.
Method
1. Press the start key.
2. Enter the desired software switch number (3 digits) using the numeric keys and press the start key.
3. Use numeric keys "7" to "0" to switch each bit between 0 and 1.
4. Press the start key to set the value.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
3JF
1-3-33