Kyocera Fax System L Service Manual page 16

3JF
1 Message display .................................... Operation procedures and indications of trouble, etc., are shown in the
2 Start key ................................................. Press this key when you want to initiate fax transmission and manual fax
3 Stop/Clear key ........................................ Press this key when you want to revise data that you have entered and return
4 Reset key ............................................... Press this key when you want to cancel an operation in progress and have the
5 Keypad ................................................... Use the keypad to enter fax numbers, etc. Even if your telephone service is
6 Interrupt key & indicator ......................... Press this key when you want to interrupt a fax reception in order to make
7 Job Accounting ....................................... Press this key at the end of copying to return to the ID-code entry screen
8 < (Left cursor) key .................................. Press this key when you want to move the cursor in the message display to
9 (Down cursor) key .............................. Press this key when you want to move the cursor downward in the message
10 (Up cursor) key ................................ Press this key when you want to move the cursor upward in the message
11 > (Right cursor) key .............................. Press this key when you want to move the cursor in the message display to
12 Enter (OK) key ..................................... Press this key when you want to advance to the next step in an operation or
13 Resolution select key & indicators ....... Press this key when you want to select the degree of resolution at which the
14 Contrast select keys & indicators ......... Press these keys when you want to select the degree of contrast, darker or
15 Memory Tx. indicator ............................ When this indicator is lit, the fax is in the Memory Transmission mode. When
16 On-Hook indicator ................................ This indicator will light when the On-Hook key has been pressed and the
17 TAD indicator ........................................ When this indicator is lit, the fax is in the TAD Reception mode.
18 Auto Rx. indicator ................................. When this indicator is lit, the fax is in the Auto Fax Reception mode.
19 Document in Memory indicator ............ When this indicator is lit, there are documents in memory that are waiting to
20 Communicating indicator ...................... When this indicator is lit, a fax communication is currently in progress. When a
21 Communication Error indicator ............. When this indicator is lit, a communications error has occurred.
22 Cover plate ........................................... Pinch the tab between your fingers and open this plate to the right or left in
1-1-6
message display.
reception.
the message display to the previous step. (The message display will NOT,
however, return to the previous step if the Enter key has already been pressed
in order to register that data.) Press this key also during registration,
modification or deletion procedures when you want to delete the data that is
currently displayed.
operation panel return to the initial mode settings.
for pulse dialing, press the star (*) key after connecting to the other party and
any key pressed on the keypad after that will transmit the related tone signal.
copies. The Interrupt indicator will light when the machine is in the Interrupt
mode.
when you are using Restricted Access.
the left.
display.
display.
the right.
when you want to register the entered data during setting and registration
procedures.
documents will be transmitted. Select among the 5 available resolution
settings: Normal, Fine, Super Fine, Ultra Fine and Half Tone. Ordinarily, all of
the resolution indicators will be out; and the Normal resolution is thus
selected. If you want to use any resolution other than Normal, press the
resolution select key until the resolution indicator that corresponds to the
desired resolution is lit.
lighter, at which the documents will be scanned. These indicators display the 3
available levels of scanning contrast. Ordinarily, the middle indicator will be lit.
If you want to increase (darken) the contrast at which documents are
scanned, press the right contrast select key to move the lit indicator towards
the right. If you want to reduce (lighten) the contrast at which documents are
scanned, press the left contrast select key to move the lit indicator towards the
left.
the indicator is out, the fax is in the Direct Feed Transmission mode.
telephone receiver is still "on the hook" (dialing will be possible without picking
up the receiver).
be printed or communications that are waiting for their appointed start time.
When this indicator is flashing, documents are currently being scanned or
received into memory.
separately purchased telephone is connected to this fax machine, this
indicator will flash while it's being used.
order to access the desired one-touch key number. Open this plate to the left
in order to use the various "function" keys (Broadcast key, etc.).