Kyocera Fax System L Service Manual page 80

3JF
Code
Fax control PCB program archive
C0880
problem*
• When power is turned on, the com-
pressed program in the Flash ROM
on the fax control PCB was not suc-
cessfully decompressed.
C0890 Fax control PCB CG font archive
problem*
• When power is turned on, the com-
pressed CG font in the Flash ROM on
the fax control PCB was not success-
fully decompressed.
C0900 Fax software incompatibility detec-
tion problem
• Version of fax software is not compat-
ible with that of main software.
Fax file system error
C0920
• The backup data is not retained for
file system abnormality of flash
memory of the fax control PCB.
*: When the network scanner is installed.
1-5-2
Contents
Causes Check procedures/corrective measures
Defective fax con- Replace the fax control PCB and check for
trol PCB. correct operation.
Defective fax con- Replace the fax control PCB and check for
trol PCB. correct operation.
Fax software ver- Check the version of the fax software and
sion or main soft- the main software, upgrade the version to
ware is earlier. the compatible software.
Replace the fax control PCB and check for
Defective fax con- correct operation.
trol PCB.
Remarks