Setting Factory Defaults - Kyocera Fax System L Service Manual

3JF
Maintenance
item No.
U602

Setting factory defaults

Description
Initializes software switches other than that for machine data and the backup data on the fax control PCB,
according to the destination and OEM.
Purpose
To initialize the fax control PCB to the factory default.
Method
1. Press the start key. Data initialization starts. To cancel data initialization, press the stop/clear key.
2. After data initialization, the entered destination and OEM codes are displayed, and the ROM version is
displayed two seconds later.
INI. SHIP DATA
COMPLETED 000 000
INI. SHIP DATA
COMPLETED V1.00
1-3-6
Description