Selecting The Wide Mode - Sony PCS-TL50 Operating Instructions Manual

Selecting the Wide Mode

The display mode of the Video Communication System is automatically set to
Zoom mode (16:9 picture) when the power of the system is turned on or the
communication starts or ends. When a menu is displayed, the display mode
automatically changes to Normal mode (4:3 picture).
You can select the desired wide mode manually by using the WIDE MODE
button on the Remote Commander.
Automatic wide mode setting
The display mode changes automatically with the following timings.
Timing
When you turn the power on
When you display a menu
When you exit a menu
When you start communication
When you end communication
To change the display mode manually
Each time you press the WIDE MODE button on the Remote Commander, the
display mode changes as follows:
IP:012.345.678.912
ISDN:012345678912
1 2
Bob
ISDN
IP:012.345.678.912
ISDN:012345678912
1
Bob
ISDN
• The display mode is shown at the bottom of the display for one second when
you switch the display mode with the WIDE MODE button.
106
Selecting the Wide Mode
Detailed Dial
Phone Book
3 4 5 6
John OSAKA NEW YORK
Dial
Zoom
Zoom Mode
Detailed Dial
Phone Book
2 3 4 5 6
John OSAKA NEW YORK
Dial
Normal
Normal Mode
The display mode automatically changes to
Zoom mode
Normal mode
Zoom mode
Zoom mode
Zoom mode
IP:012.345.678.912
ISDN:012345678912
1 2
Bob John
ISDN
IP:012.345.678.912
ISDN:012345678912
1 2
Bob John
ISDN
Wide Zoom Mode
Detailed Dial
Phone Book
3 4 5 6
OSAKA NEW YORK
Dial
Wide
Wide Mode
Detailed Dial
Phone Book
3 4 5 6
OSAKA NEW YORK
Dial
Wide Zoom