Adjusting The Volume; Adjusting The Picture Quality; Displaying The Help; Displaying The Versions And Options - Sony PCS-TL50 Operating Instructions Manual

Adjusting the Volume

Press the VOLUME +/– buttons on the Remote Commander to set the volume
level appropriately.
Volume
Notes
• The volume can be adjusted for the picture of a videoconference, the image
from a computer and the image from video equipment.
• The volume can be adjusted for the full screen image for the PinP feature, or
the left image for the PandP feature. In the PinP mode or PandP mode, the
mixed sound of the two images on the display is heard.

Adjusting the Picture Quality

Use the MENU, V/v and OK buttons on the right side of the unit to adjust the
picture quality.
For details, see "Adjusting the Picture Quality on the Display" on page 195.

Displaying the Help

Pressing the HELP button on the Remote Commander displays a balloon help
or a help screen to guide most operations on thedisplay.
Note
You can hide the balloon help used for entering characters.
Press the MENU button on the Remote Commander to show the menu, select
"Character Input Help" from the General Setup menu, and select "Off". (See page 46.)

Displaying the Versions and Options

You can check the version of the Video Communication System, versions of
the connected optional equipment for exclusive use of this system, and the
options installed in the Video Communication System by displaying the
Machine Information menu on the display.
For details on the Machine Information menu, see "Machine Information
Menu" on page 57.
30
Turning the System On/Off
050