Sony PCS-TL50 Operating Instructions Manual page 161

2
Select the line interface you are using for multipoint connection under
"Line I/F".
Select " IP" to use IP connection, "
" IP & ISDN" to use IP and ISDN connections
and
IP
3
Set up the line interface of the remote parties.
When " IP" is selected
Enter the IP addresses of all the parties in the A to E text boxes.
When " ISDN" is selected
Enter the telephone numbers of all the parties in the A to E text boxes.
To register a normal phone, enter the telephone number with "T" at the
beginning. (e.g., T0312345678)
When " IP&ISDN" is selected
Select the interface (IP or ISDN) used from the drop-down list on the right of
the A to E text boxes, then enter the IP addresses for the IP connection and the
telephone numbers for the ISDN connection for all the parties to be connected
for a multipoint conference.
To register a normal phone, enter the telephone number with "T" at the
beginning. (e.g., T0312345678)
A
B
C
D
E
For details on the setups, see step 3 in "Calling a Remote Party not
Registered in the Phone Book Using the Detailed Dial Menu" on page 81.
ISDN" to use ISDN line connection,
Detailed Dial
Line I/F
ISDN IP
ISDN
ISDN (2B)
6B(384k)
ISDN (Telephone)
IP
ISDN
IP & ISDN
SIP
Dial Save
Detailed Dial
Line I/F
IP
IP&ISDN
IP
LAN Bandwidth
1024 Kbps
IP
Number of Lines
IP 6 B (384K)
IP
Dial Save
Starting a Multipoint Videoconference
.
161