Monitoring The Local Picture As A Window Picture - Pinp Feature - Sony PCS-TL50 Operating Instructions Manual

Monitoring the Local Picture as a
Window Picture – PinP Feature
You can display the picture shot by the local camera on the display as a
window picture (Picture-in-Picture). This function enables you to check how
your own party is monitored on the remote site.
To display the window picture
Press the PinP button on the Remote Commander during communication.
The local picture is displayed as a window picture.
To change the location of the window picture
Each press of the PinP button changes the location of the window as follows:
The window picture
disappears.
Notes
• The window picture is displayed in the same location as it was last located. The
window picture is not displayed if it was not displayed last.
• The window picture is not available while not in communication with the remote
party.
102
Monitoring the Local Picture as a Window Picture – PinP Feature
Display
Local picture
Remote picture