Sony PCS-TL50 Operating Instructions Manual page 185

3
Use the V or v button on the Remote Commander to select "Dial", then
press the PUSH ENTER button, or press the CONNECT/DISCONNECT
( /
The system begins dialing the party selected in step 2. "Dialing" appears on the
display.
When the System connects to the system on the remote site, the message
"Meeting starts!" appears on the display.
To call a remote party not registered in the Phone Book
The basic procedure is the same as that for a normal point-to-point
videoconference.
For details of the procedure, see "Calling a Remote Party not Registered in the
Phone Book Using the Detailed Dial Menu" of "Calling a Remote Party" on
page 81.
1
Select "Dial" in the launcher menu to display the Dial menu.
2
Select "SIP" under "Line I/F".
3
Enter the address of a remote party in the IP text box.
The format of the address may be the following:
• 4000 (number assigned by the SIP server)
• 4000@sip.com
• 192.168.1.1 (IP address)
Some SIP servers do not support the IP address format.
Phone Book
RECENT
IP
TOKYO Bob John
IP ISDN ISDN
OSAKA NEW YORK PARIS
) button on the Remote Commander.
Detailed Dial
IP
Dial
Recent
0-9
A-I
J-S
T-Z
Dial
Edit
New Entry
Copy
Delete
One Touch
Line I/F
IP
ISDN
ISDN (2B)
ISDN(Telephone)
SIP
Save
Starting a Videoconference Using SIP
185