Selecting The Picture - Sony PCS-3000 Operating Instructions Manual

Basic Adjustments

Selecting the Picture

1-10
Chapter 1 Using the Basic System
Note
You have to set the volume level on the TV monitor at first.
For details on setting the initial volume level on the TV monitor, see "Setting the
Initial Volume Level on the TV Monitor" on page 2-24.
You can select the picture from both local and remote sites equipment.
Notes
• Items at the left are only displayed when it is on line.
• Items at the left are displayed even if the video equipment is not
connected to the remote party. When you select the item which does not
have equipment, the picture does not appear.
1
Select [INPUT] from the MAIN menu.
The INPUT sub-menu appears.
FAR NEAR
AUX2 AUX2
FAR NEAR
AUX1 AUX1
FAR NEAR
MAIN CAM MAIN CAM
SOURCE VIEW
INPUT MULTI
QUICK
MENU
[INPUT]
2
Select the picture.
Select the local picture at the right of the INPUT sub-menu, and
remote picture at the left.
Items at the left
FAR AUX2
FAR AUX1
FAR MAIN CAM
Items at the left
NEAR AUX2
NEAR AUX1
NEAR MAIN CAM
If you select [SOURCE VIEW]
• A full-sized screen of the local picture is produced.
• When the still picture is displayed, the picture returns to the moving
picuture.
P in P CAMERA SEND AUDIO OTHER
Selected picture
Displays picture from equipment connected to the
VIDEO IN AUX2 jack at the remote party.
Displays picture from equipment connected to the
VIDEO IN AUX1 jack at the remote party.
Displays picture from main camera at the remote
party.
Selected picture
Displays picture from equipment connected to the
VIDEO IN AUX2 jack at the local party.
Displays picture from equipment connected to the
VIDEO IN AUX1 jack at the local party.
Displays picture from main camera at the local party.
END OF
MEETING