Placing The Remote Commander On The Stand - Sony PCS-TL50 Operating Instructions Manual

• Do not mix old and new batteries, or different types of batteries.
• Do not attempt to charge the batteries.
• If you do not intend to use the Remote Commander for a long period of time,
remove the batteries.
• If battery leakage occurs, clean the battery compartment and replace all the
batteries with new ones.

Placing the Remote Commander on the Stand

You can operate the supplied Remote Commander by placing it on the stand
of the Video Communication System.
Note
There are built-in magnets under the Remote Commander area of the stand. To prevent
the data from being damaged, keep magnetic recording media such as floppy disks and
magnetic cards away from this area.
26
Preparing the System
Remote Commander