Using Audio/Video Signal From The Connected Equipment For A Conference; Setting Before Conferencing; Operating The System During A Conference - Sony PCS-TL50 Operating Instructions Manual

Using Audio/Video Signal from the
Connected Equipment for a Conference

Setting Before Conferencing

To use a microphone connected to the Data Solution Box
Set "Mic Select" to "DSB MIC" in the Audio Setup menu (page 47).

Operating the System During a Conference

To select a picture from a computer connected to the Data Solution Box
When using the buttons on the Data Solution Box
Press the RGB A or RGB B button on the upper panel of the Data Solution
Box.
To select the picture from the computer connected to the RGB IN A connector,
press the RGB IN A button, or the RGB IN B button to select that from the
computer connected to the RGB IN B connector.
The indicator of the selected button lights.
When using the Remote Commander
1
Press the INPUT SELECT button on the Remote Commander.
The Video Input Select menu appears.
2
Use the V, v, B or b button on the Remote Commander to select the "RGB
A" or "RGB B" input from "DSB Input".
RGB A: Select the picture from the computer connected to the RGB IN A
connector.
134

Using Audio/Video Signal from the Connected Equipment for a Conference

RGB SELECT
RGB A SEND
RGB A button RGB B button
RGB IN A RGB IN B
RGB B