Sony PCS-TL50 Operating Instructions Manual page 202

Used to enter a symbol for character
input.
j Arrow buttons (V/v/B/b)
Used to select the menu or make various
settings in the menu. Also used for
camera angle adjustment.
k ENTER button
Executes the selection or setting in the
menu and goes to the next layer.
l RETURN button
Used to return to the previous layer in
the menu.
m MENU button
Used to display a menu.
n ZOOM T/W button
Zooms in or out.
T
: to enlarge the picture
W
: to reduce the picture
o VIDEO CONF (video conference)
DISPLAY SELECT button
Used to switch to the picture of a
videoconference when the picture of
external input signal is displayed.
p VOLUME +/– button
Adjusts the sound volume.
+
: to increase the volume
–
: to decrease the volume
q PC/VIDEO DISPLAY SELECT
button
Used to switch to the picture of external
input signal when the picture of a
videoconference is displayed.
Each time you press this button, the
picture input to the RGB IN connector
and that input to the VIDEO IN jack is
selected alternately.
r MIC ON/OFF button
Cuts off the local sound to be sent to a
remote party. To restore the sound, press
the button again.
202
Location and Function of Parts and Controls
s CAPTURE IMAGE button
Used to save the picture of the remove
party as a still image in a "Memory
Stick" during conference.
t BACK LIGHT button
Turns the backlight compensation
feature on/off.
u WIDE MODE button
Selects the wide mode.
Each time you press this button, the wide
mode changes from Zoom, Wide, Wide
zoom to Normal mode in sequence.
v Battery compartment (rear)
Insert two size AA (R6) batteries.