Connecting the External MCU
Connecting the external MCU (Multipoint Control Unit) enables conduct of a
multipoint videoconference unless the MCU software is installed into the
Video Communication System.
MCU
Activating the Chair Control
If the MCU for the ISDN connection is equipped with the chair control
function, the chair control can be activated for up to 99 terminals connected.
The chair control mode allows you to specify any terminal to display, to
broadcast the specified picture to all the terminals, or to broadcast the local
picture to all the terminals.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu opens.
2
Use the V, v, B or b button to select "Chair Request" under "Broadcast
Mode".
Display Control
Display
LAN or ISDN
Control
Near
Far
Camera
PCS-TL50
Broadcast Mode Terminal
Chair
Request
1
Connecting the External MCU
171