Network - Unisight M4Core D-Seres Manual

Digital Network Video Surveillance System
Baud rate:115200

 Data bit:8
 Stop bit:1
 Parity: None
After completing all the setups please click save button, system goes back to the previous menu.

Network

Here is for you to input network information. See Figure 5-23.
 IP address: Here you can input IP address.
 DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet mask /Gateway.
These values are from DHCP function. If you have not enabled DHCP function, IP/Subnet mask/Gateway
display as zero. You need to disable DHCP function to view current IP information. Besides, when PPPoE is
operating, you can not modify IP/Subnet mask /Gateway.
 TCP port: Default value is 37777.
UDP port: Default value is 37778.

 HTTP port: Default value is 80.
 Max connection: system support maximal 10 users. 0 means there is no connection limit.
 Preferred DNS server: DNS server IP address. Default setup is 8.8.8.8.
 Alternate DNS server: DNS server alternate address. Default setup is 8.8.4.4.
 Transfer mode: Here you can select the priority between fluency/video qualities.
 LAN download: System can process the downloaded data first if you enable this function. The download
speed is 1.5X or 2.0X of the normal speed.
After completing all the setups please click save button, system goes back to the previous menu.
Figure 5-22
Unisight Digital Technologies, Inc.
64