Digital Network Video Surveillance System
Activate Pattern Function
In
input mode value in the No. blank, and click pattern button.
X419H419H419H389H389H389H396H359HFigure 6-50X
Border Setup
In
, click border button. The interface is shown as in
X420H420H420H390H390H390H397H360HFigure 6-49X
Please go to
, use direction arrows to select camera left limit, and then please go to
X422H422H422H392H392H392H399H362HFigure 6-46X
limit button
Repeat the above procedures to set right limit.
Activate Border Function
In
, click auto scan button, the system begins auto scan. Correspondingly, the auto scan button
X424H424H424H394H394H394H401H364HFigure 6-50X
changes to stop button.
Click stop button to terminate scan operation.
Flip
In
, click page switch button, you can see an interface is shown as below. See
X425H425H425H395H395H395H402H365HFigure 6-50X
auxiliary function.
Click page switch button again, system goes back to
Figure 6-53
.
X421H421H421H391H391H391H398H361HFigure 6-54X
Figure 6-54
.
X427H427H427H397H397H397H404H367HFigure 6-46X
Unisight Digital Technologies, Inc.
and click left
X423H423H423H393H393H393H400H363HFigure 6-54X
. Here you can set
X426H426H426H396H396H396H403H366HFigure 6-55X
88