Table of Contents
Advertisement
Digital Network Video Surveillance System
Replace Button Battery
Please make sure to use the same battery model if possible.
We recommend replace battery regularly (such as one-year) to guarantee system time accuracy.
Important!
Before replacement, please save the system setup, otherwise, you may lose the data completely!
Manual Record
Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time and channel
name. If you want to change system date and time, you can refer to general settings (Main Menu-
>Setting->General). If you want to modify the channel name, please refer to the display settings (Main
Menu->Setting->Display)
In live view window, you can see system date, time and channel name.
In multiple-window display mode, double click one window or click the corresponding channel number
in the remote control, you can go to full-screen display mode. In one-window display, double click the
vide window or click the multiple-channel preview button in the remote control you can go back to
multiple-window display mode.
Note: Please refer to the following sheet for channel status.
stands for closing switch function.
Recording status
1
Motion detection
2
Manual Record
Note:
You need to have proper rights to implement the following operations. Please make sure the SD card
has been properly installed.
Manual record menu
There are two ways for you to go to manual record menu.
Right click mouse or in the main menu, Advanced->Manual Record.
In live viewing mode, click record button in the front panel or record button in the remote control.
Manual record menu is shown as in
Basic operation
There are three statuses: schedule/manual/stop. Please highlight icon"○" to select corresponding
channel.
Manual: The highest priority. After manual setup, all selected channels will begin ordinary recording.
Schedule: Channel records as you have set in recording setup (Main Menu->Setting->Schedule)
Stop: All channels stop recording.
Video loss
3
Camera lock
4
Figure 4-5.
.
X295H295H295H
X
Unisight Digital Technologies, Inc.
stands for opening switch function,
35
Advertisement
Table of Contents
