Installation And Connections; Check Unpacked Dvr; About Front Panel And Real Panel; Sd Card - Unisight M4Core D-Seres Manual

Digital Network Video Surveillance System

Installation and Connections

Note: All the installation and operations here should conform to your local electric safety rules.

Check Unpacked DVR

When you receive the DVR from the forwarding agent, please check whether there is any visible damage.
The protective materials used for the package of the DVR can protect most accidental clashes during
transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list on the warranty card (Remote control is optional). Finally
you can remove the protective film of the DVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.

About Front Panel and Real Panel

For detailed information of the function keys in the front panel and the ports in the rear panel, please refer
to the appendix for detailed information.
The model in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number when
we provide the service after sales.

SD Card

Installation

The unit you received has no SD card. You need to purchase and then follow the steps listed below to
install.
1) Unlock the SD card lock. Please insert the key to the hole and then turn clockwise to open the lock. See
Figure 3-1.Please follow the arrowhead of the beeline to turn the plastic handspike.
Figure 3-1
2) Install SD card. Now you can see an interface shown as in Figure 3-2. Please follow the arrowhead to
insert the SD card to the slot.
Unisight Digital Technologies, Inc.
23