Table of Contents
Advertisement
Digital Network Video Surveillance System
Backup
Select backup device and then set channel, file start time and end time.
Click add button, system begins search. All matched files are listed below. System automatically
calculates the capacity needed and remained. See
system only backup files with a √ before channel name. You can use Fn or cancel button to delete √
after file serial number.
Click backup button, you can backup selected files. There is a process bar for you reference.
When the system completes backup, you can see a dialogue box prompting successful backup.
Click backup button, system begins burning. At the same time, the backup button becomes stop
button. You can view the remaining time and process bar at the left bottom. See
The file name format usually is: SN_CH+channel number+time Y+M+D+H+M+S. In the file name, the
YDM format is the same as you set in general interface. (Main Menu ->Setting ->General).File
extension name is .dav. You can visit our website to view listed CD-ROM brand.
Tips:
During backup process, you can click ESC to exit current interface for other operation. The system will
not terminate backup process.
Note:
When you click stop button during the burning process, the stop function becomes activated
immediately. For example, if there are ten files, when you click stop system just backup five files,
system only save the previous 5 files in the device (But you can view ten file names).
Figure 4-27.
X320H320H320H290H290H290H297H
Figure 4-31
Figure 4-32
Unisight Digital Technologies, Inc.
Figure 4-28.
X321H321H321H291H291H291H298H
51
Advertisement
Table of Contents
