Digital Network Video Surveillance System
5
6
7
8
9/10
11/12
Alarm Input Port
Please refer to the following sheet for more information. See Figure 3-13.
Normal open or Normal close type.
Please parallel connect COM end and GND end of the alarm detector (Provide external power to the alarm
detector).
Please parallel connect the Ground of the DVR and the ground of the alarm detector.
Please connect the NC port of the alarm sensor to the DVR alarm input(ALARM)
Use the same ground with that of DVR if you use external power to the alarm device.
Alarm Output Port
2-way relay alarm output (NO contact). Provide external power to external alarm device.
To avoid overloading, please read the following relay parameters sheet carefully.
Model:
Connect to the left-turn alarm.
Alarm input 5(White cable)
Connect to right-turn alarm.
Alarm input 6(White cable)
Connect to brake alarm.
Alarm input 7(White cable)
Connect to running status alarm (Running/stop)
Alarm ground cable(Purple cable)
NO output 1(Yellow cable)
NO output 2(Yellow cable)
Figure 3-13
Relay Specification
B3GA4.5Z
Unisight Digital Technologies, Inc.
30