Mobile Configuration - Unisight M4Core D-Seres Manual

Digital Network Video Surveillance System
Period
Wireless Login
network status
status
IP address
Subnet
mask
Gateway
Wireless CDMA_1X
signal signal
EVDO
signal
Save
Refresh

Mobile Configuration

Please note only the unit of 3G module supports this function.
Mobile configuration interface is shown as in Figure 7-56.
Click set button, the interface is shown as in Figure 7-55.
You can set the period to connect to the 3G network. System only
enables wireless network dialup function during the specified period.
There are max six periods in one day.
You can see device has registered to the 3G network or not.
After the Radius server verification, you can see the device IP address
the DHCP server allocated to.
After the Radius server verification, you can see the device subnet
mask the DHCP server allocated to.
After the Radius server verification, you can see the device gateway
the DHCP server allocated to.
You can view current 3G network signal.
After the device connected to the EVDO module，you can view

CDMA_1x network signal.
After the device connected to the W-CDMA or TD module，you can

view the EDGE network signal.
You can view current 3G network signal.
After the device connected to the EVDO module，you can view

EVDO signal.
After the device connected to the W-CDMA module，you can view

W_CDMA network signal here.
After the device connected to TD module，you can view TD-

SCDMA network signal here.
Click this button to save current setup.
Click this button to get device latest configuration.
Unisight Digital Technologies, Inc.
135