Hardware Mode - Unisight M4Core D-Seres Manual

Digital video network surveillance system
Table of Contents

Advertisement

Digital Network Video Surveillance System
13
14
15
16
17
18

Hardware Mode

The system has two statuses: normal running status and alarm running status.
Important:
When the device is running, you need to reboot the device to activate mode modification setup.
In the normal running status, there are three working modes and can be enabled via the hardware setup.
Mode 1(Default mode): Picture quality has the higher priority. The record resolution supports 1-channel
D1 and 3-channel CIF. The D1 frame rate is 2fps and bit rate is
Mode 2: Video fluency has the higher priority. System adopts 4-channel CIF record. Bit rate is 25fps
and the bit rate is 640kbps.
Mode 3: Customer self-defined. It supports customized setup. The max capabilities are: 4CIF/25fps.
The default setup is 4-channel CIF. Frame rate is 25fps and bit rate is
Please note system default setup is Mode 1.
In the alarm running status, there is only one alarm mode and it can be enabled via the software setup. It
can guarantee the fluency and the picture quality at the same time. It adopts 4-channel CIF record. The
frame rate uses 25fps and the bit rate is 512kbps.
Please note the alarm running status initialization setup is disabled by default.
Hardware Reset
The hardware reset via the IO.
During the device running process, you can click the RESET button at the front-panel to restore the system
Network indication light
The light is on when the network connection is
OK.
Otherwise it is off.
SD card read/write indication light
The light is on when SD card read/write error
occurs.
Otherwise it is off.
SD card indication light
The light is on when the SD card is working
properly.
Otherwise it is off.
Working mode status indication light
The corresponding working mode light is on
when the system is in the specified working
mode.
Channel record indication light
The light is on when the corresponding channel
is recording.
Otherwise it is off.
Power indication light
The light is on when system power supplying is
OK.
Otherwise it is off.
Unisight Digital Technologies, Inc.
128kbps.
640kbps.
16

Advertisement

Table of Contents
loading

Table of Contents