Unisight M4Core D-Seres Manual page 136

Digital Network Video Surveillance System
Please refer to the following sheet for detailed information.
Parameter
Send event
message
Receiver
SMS activate
Sender
Dial activate
Caller
Add
Figure 7-111 Mobile Configuration
Function
Device can send the event message (alarm information, motion detection
and etc) to the mobile user. You can check the box to enable the function.
You can input one or more mobile number(s) here to receive the message.
The mobile user can send out message to activate the device to connect
to the 3G network.
You need to check the box to enable current function.
Please note the contents shall not be capitalized and there shall be
no blank.
You can input several senders' mobile number here.
The mobile user can give a call to activate the device to connect to the 3G
network.
You need to check the box to enable current function.
Please note the dial activate function is to control the connection.
You can not use this function to disconnect the wireless connection.
You can input several senders' mobile number here.
Click it to add the corresponding mobile phone user.
Unisight Digital Technologies, Inc.
136