Table of Contents
Advertisement
Digital Network Video Surveillance System
Frame rate
Resolution
Quality
Abnormality
The abnormality interface is shown as below. See Figure 7-50.
Please refer to the following sheet for detailed information.
Parameter Function
Event
Type
Normal
The corresponding alarm activation output channel when alarm occurs,
Out
There are 7 channels.
Latch
The alarm output can delay for the specified time after alarm stops. Then
system disables alarm and corresponding activation output.
Send
If you enable this function, system can send out email to alarm the
email
specified user. Please note this function is null when net error occurs.
Alarm
System can upload the alarm signal to the network (includes the alarm
upload
centre.)
You can select from the dropdown list.
You can select from the dropdown list.
You can select from the dropdown list. Here is for you to set
video quality.
Figure 7-105
The abnormal events include: no disk, no space, disk error, net error.
You need to draw a circle to enable this function.
Unisight Digital Technologies, Inc.
129
Advertisement
Table of Contents
