Abnormality - Unisight M4Core D-Seres Manual

Digital Network Video Surveillance System
Click alarm set button, the interface is shown as below. See Figure 5-41. (This interface is just like the
abnormity setup). Please refer to chapter 5.5.2 for detailed information.
Please highlight icon

Abnormality

Abnormality interface is shown as in Figure 5-42.
 Event type: There are several options for you such as disk error, no disk, disconnection, IP conflict
and etc.
 Alarm output: Please select alarm activation output port (multiple choices).
 Latch: Here you can set corresponding delaying time. The value ranges from 1s-300s. System
Figure 5-40
to select the corresponding function.
Figure 5-41
Unisight Digital Technologies, Inc.
75