Config File Backup; Information; Hdd Information - Unisight M4Core D-Seres Manual

Digital Network Video Surveillance System

Config File Backup

The configuration file backup interface is shown as below. See Figure 5-50.
This function allows you to copy current system configuration to other devices.

Information

Here is for you to view system information. There are total five items: HDD (hard disk information), BPS
(data stream statistics), Log and version, and online user. See Figure 5-51.

HDD Information

Here is to list SD card type, total space, free space, video start time and status. See Figure 5-52.
○ means current SD card is normal. X means there is error. - means there is no SD card.
If SD card is damaged, system shows as "?". Please remove the SD card before you add a new one.
When SD card confliction occurs, you can check system time and SD card time are identical or not. If they
are not identical, please go to General (Chapter 5.3.1) to adjust system time or go to HDD Management
(Chapter 5.5.1) to format HDD and then reboot the DVR.
After system booted up, if there is any confliction, system goes to HDD information interface directly.
Figure 5-50
Figure 5-51
Unisight Digital Technologies, Inc.
81