Activate Pattern Function; Auto Scan Setup; Activate Auto Scan; Flip - Unisight M4Core D-Seres Manual

Digital Network Video Surveillance System

Activate Pattern Function

In Figure 4-35, input mode value in the No. blank, and click pattern button.
X346H346H346H316H316H316H323H

Auto Scan Setup

In Figure 4-34, click border button. The interface is shown as in
X347H347H347H317H317H317H324H
Please go to Figure 4-31
X349H349H349H319H319H319H326H
Then please go to Figure 4-39
X350H350H350H320H320H320H327H
Repeat the above procedures to set right limit.

Activate Auto Scan

In Figure 4-35 , click "Auto Scan" button, the system begins auto scan. Correspondingly, the auto scan
X351H351H351H321H321H321H328H X
button becomes Stop button. Click stop button to terminate scan operation.

Flip

In Figure 4-35 , click page switch button, you can see an interface is shown as below. See
X352H352H352H322H322H322H329H X
40 . Here you can set auxiliary function. The aux value has relation ship with the Aux button of the decoder.
X
Click page switch button again, system goes back to
Figure 4-42
, use direction arrows to select camera left limit
X
and click left limit button
X
Figure 4-43
X354H354H354H324H324H324H331H
Figure 4-39.
X348H348H348H318H318H318H325H
Figure 4-31.
Unisight Digital Technologies, Inc.
Figure 4-
X353H353H353H323H323H323H330H
57