Unisight M4Core D-Seres Manual page 72

Digital Network Video Surveillance System
Resolution: There are four options: 1280×1024, 1280×720, 1024×768,800×600(default). Please note

system needs to reboot to active current setup.
 Enable tour: activate tour function.

Interval: Input proper interval value here. The value ranges from 5-120 seconds. In tour process, you
can use mouse click to use the switch function.
closing switch function.
 Motion tour type: System supports 1 window tour.
 Alarm tour type: System supports 1 window tour.
Please highlight icon
After completing all the setups please click save button, system goes back to the previous menu.
In Figure 5-35, click modify button after channel. You can see an interface is shown as in Figure 5-36.
Please note all your modification here applies to local end only. You need to refresh web or client-end to get
the latest channel name. System max support 25-digital character.
In tour mode, you can see the following interface. On the right corner, right click mouse or click shift button,
you can control the tour. There are two icons:
enabling window function. See Figure 5-37.
to select the corresponding function.
Figure 5-35
Figure 5-36
stands for enabling window switch and
Stands for opening switch function,
Unisight Digital Technologies, Inc.
stands for
stands for
72