Table of Contents
Advertisement
Digital Network Video Surveillance System
Delete
Message type
Title
Event message
save
SMS save
Dial save
Refresh
Search
Click search button, you can see an interface is shown as in
Please select record playback mode, and then select start time, end time and channel. Then please click
search button, you can see the corresponding files in the list.
Click it to remove the corresponding mobile phone user.
There are two types: SMS and MMS.
Right now system supports SMS only.
You can input message subject here.
System can save the message receiver number so that device can send
out alarm (motion detect) message to the specified mobile phone(s).
System can save the mobile phone number which can send out the
message to activate the device.
Before the operation, please make sure you device can connect to the 3G
network and you have enabled the 3G function.
When the specified mobile number sends out the message "on" to the
device, the device begins 3G dial up and then connect to the 3G network.
When the specified mobile number sends out the message "off" to the
device, the device disconnects the network and then becomes offline.
Please make sure the content contains small characters only and there is
no backspace.
System can save the mobile phone number which can dial the device to
enable it to connect to the 3G network.
Before the operation, please make sure you device can connect to the 3G
network and you have enabled the 3G function.
When the specified mobile phone number gives a call to the device, the
user can hear device prompt: The user is busy now. Then the device
begins dial up and connects to the 3G network.
Click this button to get device latest configuration.
Figure 7-57
X479H479H479H449H449H449H
Unisight Digital Technologies, Inc.
137
Advertisement
Table of Contents
