Table of Contents
Advertisement
Digital Network Video Surveillance System
occurs, and otherwise system just operates the schedule snapshot.
Image FTP
In Network interface, you can set FTP server information. Please enable FTP function and then click
save button. See Figure 4-16.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.4.2.1) or activation snapshot (Chapter 4.4.2.2) first, now
system can upload the image file to the FTP server.
Detect
Go to Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface. See
three detection types: motion detection, video loss, camera masking.
There is no region setup item and sensitivity setup item in video loss and camera masking type.
You can see motion detect symbol in corresponding preview channel when a motion detect alarm
occurs.
Please use Aux button to help when you use the mouse to drag the motion detect region. Right
click the mouse to exit current region setup interface. Please click the Save button to save current
setup.
Motion Detect
Detection menu is shown as below. See
Event type: from the dropdown list you can select motion detection type.
Channel: select the channel to activate recording function once alarm occurred. Please make sure you
have set MD record in encode interface(Main Menu->Setting->Schedule) and schedule record in manual record
interface(Main Menu->Advanced->Manual Record)
Latch: when motion detection complete, system auto delays detecting for a specified time. The value
ranges from 1-300(Unit: second)
Figure 4-20
Figure 4-17.
X303H303H303H
Unisight Digital Technologies, Inc.
Please input the
corresponding information
here, if you just upload the
image FTP.
. There are
X302H302H302H287H287H287H294H294HFigure 4-21X
44
Advertisement
Table of Contents
