Cp-315 Board - Sony DSR-300 Service Manual

2-11-13. CP-315 Board

1. Remove the left panel, right panel, CN-1519 board, and
PS-495 board.
(Refer to sections 2-2-1, 2-2-2, 2-11-11, and 2-11-12.)
2. Disconnect the four connectors (CN3, CN6, CN8 and
CN9) and remove the two screws (B2.6 x 4) from the
CP-315 board.
3. While opening section A of the CP-315 board in the
arrow direction, remove the CP sheet.
4. Remove the nine screws (B2.6 x 4, precision screw
P2.6 x 6, and B2 x 3).
5. Remove the CP-315 board in the arrow direction.
Point to notice when attaching the board:
1. Be sure to insert the claw into clearance.
2. Be sure to pass the harness through underneath boss
portion.
DSR-300/P(E)/V1
CN8
Screw
B2.6 x 4
CN9
Boss Harness
portion
Claw
Clearance
Precision
screws
P2.6 x 6
Boss
Screw
B2.6 x 4
CP-315 board
CN6
CN3
CP sheet
Section A of
CP-315 board
Screws
B2 x 3
Screws
B2.6 x 4
CP-315 board
Holes
Boss
Screws
B2.6 x 4
2-23