4-31. REPLACEMENT OF REEL
MOVING ARM ASSEMBLY
Replacement Flowchart
Removal of SV-164 board
Replacement of reel moving arm assembly
Removal/Attachment
1. Remove the SV-164 board.
(Refer to Section 2-11-8.)
2. Remove the screw and stopper washer shown in
the figure, and remove the reel moving arm
assembly.
3. Attach the new reel moving arm assembly in the
reverse order of step 2.
4. Attach the parts removed in the reverse order of
step 1.
4-42
Reel moving arm assembly
Screw
Stopper washer
DSR-300/P(E)/V1