Sony DSR-300 Service Manual page 186

4-9. REPLACEMENT OF HARD
BRAKE ARM (T) ASSEMBLY
Mode: Unthreading end
Replacement Flowchart
Removal of soft brake arm (T) assembly
Removal of TL soft brake assembly
Removal of T brake release arm
Removal of T soft brake lever
Replacement of hard brake arm (T) assembly
Removal
1. Remove the soft brake arm (T) assembly.
(Refer to Section 4-8-1.)
2. Remove the TL soft brake assembly.
(Refer to Section 4-8-2.)
3. Remove spring (A) and then remove the T soft
brake lever.
4. Remove the T brake release arm.
5. Remove the spring (B) shown in the figure, and
remove the hard brake arm (T) assembly.
Attachment
6. Attach a new hard brake arm (T) assembly.
7. Attach the removed parts in the reverse order of
steps 1 to 4.
4-12
Spring (A)
Hard brake
arm (T) assembly
Spring (B)
T soft
brake lever
T brake
release arm
DSR-300/P(E)/V1