Sony DSR-300 Service Manual page 117

2-19-2. Changing the Voltage (2)
The battery before end/battery end and BP battery preset
voltage can be changed according to the following
procedure from the SYSTEM menu without the equipment
listed in the previous section 2-19-1. However, the voltage
can be changed more accurately using the procedure
described in the previous section, it is recommended that
the voltage be changed using that procedure.
Settable range: 11.0 to 12.5 V (Battery before end/
battery end)
12.0 to 15.9 V (BP battery preset)
Setting at shipment: Battery before end voltage: 11.27 V
Battery end voltage:
BP battery preset voltage: 12.97 V
Standard values at shipment:
<Battery before end/battery end>
Voltage 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0
(V)
Standard 8d 92 97 9c
value
<BP battery preset>
Voltage 12.5 12.6 12.7 12.8 12.9 13.0 13.1 13.2 13.3 13.4 13.5
(V)
Standard 4d 52 57 5c
value
* The standard value may differ according to the unit.
The above values are average values.
Switch setting: BACK TALLY = OFF
Setting
1. Turn on the power.
DSR-300/P(E)/V1
10.95 V
A1 A6 Ab b0 b5 bA bF
61 67 6c 71 76 7b 80
2-41