Sony DSR-300 Service Manual page 230

4-38. REEL TABLE FWD/REV
REWINDING TORQUE CHECK/
ADJUSTMENT
Reel table position: Standard cassette position
. Tools
Torque gauge (90ATG): J-6442-510-A
Rewinding torque measuring attachment:
Torque cassette: J-6082-373-A
1. Remove the cassette compartment.
(Refer to Section 4-2.)
2. While pressing the SHIFT button inside the TC
panel, press the MENU button.
3. While pressing MENU button, release the SHIFT
button. Check that "600 oFF" is displayed about
1 second later, and release the MENU button.
(Displayed characters underlined in the
following description indicate that they are
blinking.)
4. Press the RESET (MENU SET) button once to
blink "oFF."
5. Press the ADVANCE button once and select
"on." (on and oFF are repeated each time the
ADVANCE button is pressed.)
6. Press the RESET (MENU SET) button once.
7. Press the ADVANCE button or SHIFT button to
display Menu No. 608.
8. Press the RESET (MENU SET) button.
Check that the parts displayed on the display
window blink alternately as shown in the figure.
4-56
J-6442-520-A
Blinks alternately
DSR-300/P(E)/V1