Fp-99 Board - Sony DSR-300 Service Manual

2-11-2. FP-99 Board

1. Open the right panel. (Refer to section 2-2-2.)
2. Disconnect the flat cable (CN801) and the three
connectors (CN802, CN803, and CN804) from the FP-
99 board.
3. Remove the three screws (B2 x 3) and remove the FP-
99 board.
2-11-3. GCN-15 and SW-929 Boards
1. Remove the right panel. (Refer to section 2-2-2.)
2. Disconnect the two connectors (CN802 and CN804)
from the FP-99 board.
3. Remove the three screws (B2.6 x 4) and remove the
GCN-15 board.
4. Disconnect the a connector (CN101) from the SW-929
board.
5. Remove the screw (B2.6 x 4) and remove the SW-929
board together with bracket.
6. Remove the screw (B2 x 3) and remove the SW-929
board.
DSR-300/P(E)/V1
CN804
Screw
B2 x 3
Screw
FP-99 board
B2 x 3
CN-801
CN803
Screw
SW-929 board
B2.6 x 4
bracket
SW-929 board
CN101
Screw B2 x 3
CN804
Right panel
CN802
Screw
B2 x 3
Screws
B2.6 x 4
GCN-15 board
CN802
FP-99 board
2-17