Sony DSR-300 Service Manual page 54

Viewfinder Advanced Menu
Advanced menu page 4
PAGE4 (NEXTm$ PREVm4)
MARKER : CENT/90%
mZEBRA : 1
ZEBRA1 : 70IRE
REC TIME: INT
VF SDTL : ±0
×
VF TALLY: 2
EXIT MENU (YESmPUSH)
a) For DSR-300P: 70%
Item Settings
MARKER CENT/90% (normal value):
Selects ON/OFF setting for Displays center marker and
center marker, size setting safety zone marker at 90%
(percentage of viewfinder size.
screen area), and display CENT/80%: Displays center
ON/OFF setting. marker and safety zone
marker at 80% size.
90%: Displays only safety
zone marker at 90% size.
80%: Displays only safety
zone marker at 80% size.
CENT: Displays only center
marker.
ZEBRA 1 (normal value): Displays
Selects type of zebra pattern the zebra pattern over parts
display. having a video level.
between 70 and 90 IRE (or
70 and 90%).
Use the next item (ZEBRA1)
to select the base level.
2: Displays the zebra pattern
over parts having video
levels of 100 IRE or above
( or 100% or above).
1/2: Dual display (both 1
and 2)
ZEBRA1 70 IRE (normal value) to 90
Sets base level for zebra IRE or 70% (normal value)
pattern 1. to 90%
Can be set for each IRE
step or 1% step.
REC TIME INT (normal value):
Selects whether to show the Recording time of the
recording time (TTL) of the internal VCR
internal VCR or of the EXT: Recording time of the
external VCR. external VCR
VF SDTL –99 to ±0 (normal value) to
Sets the detail level of +99
images on the viewfinder Negative values set softer
screen (displayed when edges and positive values
using a viewfinder other than set sharper edges.
the DXF-701/701CE/701WS/
701WSCE).
×1: Uses only the upper
VF TALLY
REC/TALLY indicator.
Selects whether or not to use
×2 (normal value): Uses
more than one REC/TALLY
indicators in the viewfinder two REC/TALLY indicators.
(displayed only when the
DXF-701WS/701WSCE
viewfinder is attached).
86
Chapter 4 Viewfinder Screen Indications and Menus
Advanced menu page 5
PAGE5 (NEXTm$ PREVm4)
mSS IND: ALWAYS
LL IND: ON
IRIS IND: ON
GAIN IND: ON
FILTER IND: ON
WHITE IND: ON
SKIN IND: ON
EXIT MENU (YESmPUSH)
Item
Settings
SS IND 3SEC: Displays shutter
Selects the mode for setting for three seconds only
showing the shutter setting when the setting has been
when displaying the normal changed.
indications. ALWAYS (normal value):
Displays the shutter setting at
all times.
LL IND ON (normal value):
Selects whether or not to Displays.
show the LOW LIGHT OFF: Not display.
indication on the normal
indications when inadequate
lighting is detected.
IRIS IND ON (normal value):
Selects whether or not to Displays.
show the lens's F-stop value OFF: Not display.
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
GAIN IND ON (normal value): Always
Selects whether or not to displays.
always show the gain OFF: displays for two
setting indication on the seconds only when the
normal indications. setting has been changed.
FILTER IND ON (normal value): Always
Selects whether or not to displays.
always show the FILTER OFF: Displays for two
knob setting indication on seconds only when the
the normal indications. setting has been changed.
The FILTER knob setting
indication is always
displayed when in EZ mode.
WHITE IND ON (normal value): Displays.
Selects whether or not to OFF: Not display.
show the setting of the white
balance switch.
SKIN IND ON (normal value): Displays.
Selects whether or not to OFF: Not display.
show the setting for skin
detail correction.
Advanced menu page 6
P A G E 6 ( N E X T m$ P R E V m4)
mA U D I O I N D : O N
T A P E I N D : O N
T C I N D : O N
I D I N D : O F F
I D S E T : µ
( )
E X I T M E N U ( Y E S mPUSH)
Item Settings
AUDIO IND ON (normal value):
Selects whether or not to Displays.
show the audio level OFF: Not display.
indication on the normal
indications.
TAPE IND ON (normal value):
Selects whether or not to Displays.
show the remaining tape OFF: Not display.
indication on the normal
indications.
TC IND ON (normal value):
Selects whether or not to Displays.
show the time data indication OFF: Not display.
on the normal indications.
ID IND ON (normal value):
Selects whether or not to Displays.
display the camera ID when OFF: Not display.
displaying color bars.
ID SET See "To set the camera ID"
Sets the camera ID (up to on below.
eight characters, including
alphanumerics, symbols,
and spaces).
To set the camera ID
1
Press the MENU switch or turn the MENU dial to
move the cursor to ID SET.
The cursor (→) changes to the text entry arrow (↓).
PAGE6 (NEXTm$ PREVm4)
AUDIO IND: ON
TAPE IND: ON Current camera ID
TC IND: ON
ID IND: OFF
ID SET: µ
(ABC )
EXIT MENU (YESmPUSH)
2
Press and turn the MENU dial to move the text
entry arrow.
Turn the MENU dial upward to move the cursor to
the right or downward to move it to the left.
3
Press and turn the MENU dial to enter the desired
characters.
The displayed character changes as you turn the
dial.
4
Return to step 2 and repeat the text entry
procedure.
5
When you have finished entering the text, press
and turn the MENU dial to move the cursor to the
parenthesis position.
This clears the displayed menu and returns to the
normal indications.
Advanced menu page 7
P A G E 7 ( N E X T m$ P R E V m4)
a)
mEZ MODE : CUSTOM
A.IRIS-AGC: F2.8
A.IRIS-AE : F16
AGC LIMIT : 12dB
E X I T M E N U ( Y E S mPUSH)
a) At shipping, the EZ MODE is set to STD.
Item
Settings
EZ MODE STD (normal value):
When the EZ MODE button Changes settings to
has been set to EZ mode standard settings.
ON, this selects whether or CUSTOM: Changes only
not to change the settings of some settings to standard
other switches and menus to settings.
the standard settings. (The For details of the settings
EZ mode function cannot be when STD or CUSTOM is
used during remote specified, see "EZ mode
operation.) settings" on next page.
A.IRIS-AGC F1.4, F1.8, F2.8 (normal
Selects auto iris adjustment value), F4, F5.6
which sets an F-stop value
that can be switched to AGC
(displayed only when the EZ
MODE is set to CUSTOM).
A.IRIS-AE F5.6 , F8, F11, F16 (normal
Selects auto iris adjustment value)
which sets an F-stop value
that can be switched to AE
(displayed only when the EZ
MODE is set to CUSTOM).
AGC LIMIT 0 dB, 3 dB, 6 dB, 9 dB, 12
Sets an upper limit value for dB (normal value)
AGC adjustment (displayed
only when the EZ MODE is
set to CUSTOM).
87
Chapter 4 Viewfinder Screen Indications and Menus