Sony DSR-300 Service Manual page 217

4-32. REPLACEMENT OF REEL
PLATE PRESSING LINK
ASSEMBLY
Replacement Flowchart
Removal of SV-164 board
Removal of TR band assembly
Removal of sub reel gear (S) assembly
Removal of S side reel table assembly
Removal of S reel plate assembly
Removal of sub reel gear (T) assembly
Removal of T side reel table assembly
Removal of T reel plate assembly
Removal of reel moving arm assembly
Replacement of reel plate pressing link assembly
Reel table FWD/REV rewinding torque check/adjustment
TR arm assembly position check/adjustment
FWD back tension check/adjustment
DSR-300/P(E)/V1
Removal
1. Remove the SV-164 board. (Refer to Section 2-11-8.)
2. Remove the TR band assembly. (Refer to Section 4-12.)
3. Remove the sub reel gear (S) assembly.
(Refer to Section 4-10.)
4. Remove the S side reel table assembly. (Refer to Section 4-4.)
5. Remove the S reel plate assembly. (Refer to Section 4-19.)
6. Remove the sub reel gear (T) assembly.
(Refer to Section 4-11.)
7. Remove the T side reel table assembly. (Refer to Section 4-5.)
8. Remove the T reel plate assembly. (Refer to Section 4-20.)
9. Remove the reel moving arm assembly.
(Refer to Section 4-31.)
4-43