Sony DSR-300 Service Manual page 143

. . . . . During SEt indication: Initializing starts by pressing the RESET button.
Note:
. . . . . During ESC indication: Menu returns to the "Menu Item Select Mode" by pressing the RESET button
MENU MENU
No. DESCRIPTION
700 REC CURRENT
ADJ.
701 PLL ADJ.
702 AGC DELAY ADJ.
704 AUTO EQ ADJ.
750 VA EEPROM (SY)
INITIALIZE
751 VA EEPROM (SP)
INITIALIZE
752 KY EEPROM
ECHO BACK
DATA PRESET
753 MECHANICAL
CONTROL ADJ.
ITEM INITIALIZE
754 ERROR HISTORY
INITIALIZE
755 RP ADJ. ITEM
INITIALIZE
Buttons used: RESET → RESET (MENU SET) button, ADV. → ADVANCE button, MENU → MENU button, SHIFT
→ SHIFT button. For basic operation of buttons, refer to the beginning of section 2-25. Menu (LCD).
DSR-300/P(E)/V1
without start up the initializing.
DISPLAY WINDOW (LCD)
(When changing data)
(When changing data)
(Save NG)
(When changing data)
(Starting initialization)
(Stopping initialization)
BUTTON CONTENTS
USED
RESET For details, refer to section 8 VTR Block Electrical Alignment.
RESET Initialize the SY EEPROM (IC401) on the DPR-99 board.
If "no" is displayed when pressing the RESET button,
initializing data is not saved correctly.
Initialize the SP EEPROM (IC652) on the DPR-99 board.
If "no" is displayed when pressing the RESET button,
initializing data is not saved correctly.
Presetting results are displayed when pressing the RESET
button.
YES: Preset OK
no: Preset NG
ADV. Initialize the EEPROM (IC1) on the HN-227 board.
RESET
Saved results of initializing data are displayed by pressing the
RESET button.
YES: Save OK
noE0: Save NG or already initialized
Initializing of error history can be performed.
Saved results of initializing data are displayed by pressing the
RESET button.
YES: Save OK
no: Save NG
Initialize the EEPROM (IC770) on the RP-91 board.
Saved results of initializing data are displayed by pressing the
RESET button.
YES: Save OK
no: Save NG
2-67