Navigating The Menus - Christie DS4K User Manual

Section 3: Operation
3.3 Navigating the
Menus
On-line Help
3-10
Lens
Shift
NOTE: Use the
same effect as if using the arrow keys related to "Lens V" or "Lens H" on the IR
remote.
Laser
Press to activate the laser pointer on the
remote. This feature is useful when making
presentations - just point the remote at the
screen to highlight an area of your presentation.
The closer you are to the screen the brighter the
laser beam appears. The laser pointer works best
in an environment where ambient lighting can
be controlled.
NOTE: Leave batteries in the wired remote keypad for the
Most of the controls for the projector are
accessed from within the projector's menu
system. There are several groups of related
functions, with each group selectable from the
Main menu as shown at right. Press
any time to display this Main menu.
On the remote keypad, either enter the number
corresponding to the function menu you wish
to access, such as
menu, or use the
keypad to highlight the desired option, then press
menu or pull-down list of further options will then appear.
With a function menu displayed, navigate in a similar manner—enter a menu option
number for any numbered option, or use the
option, then press
the arrow keys to access the remainder of the menu. Locked items or items that do not
pertain to the current action or condition appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
•
Press to return to the previous screen
Exit
•
Press to leave the menu system and return to the presentation
Menu
'
If at any time you are uncertain what to do next, press
information about the current menu or highlighted option. Press
addition, a line of "hint" text is included at the bottom of some menus.
key (built-in keypad) with the general
at
M enu
for the Image Settings
2
keys on any
(Enter). Extra long menus have a scroll bar on the right—use
User's Manual
keys to get the
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
LASER DIODE
Wavelength 670nm
Max Output 1mW
CLASS II LASER PRODUCT
key to work.
Figure 3.4. Entering the Menu
System
. The corresponding function
keys to highlight the desired
to display summary
Help
again to exit. In
Help