Christie DS4K User Manual page 139

Composite / S-Video
Input Module
38-804608-xx
DVI Input Module
38-804635-xx
'
The module receives either composite video or S-video input signals from tape or disk
players (do not connect both types of signals simultaneously). Video inputs are 75
terminated. Video outputs are provided for buffered loop-through to another display
device.
Composite/S-video Features
◊
BNC connectors for composite RGB signals
◊
4-pin mini-DIN connectors for S-Video signals
◊
buffered loop-through video outputs
NOTES: 1) This interface is not a decoder. NTSC, PAL, or SECAM signals must
connect to the video decoder installed at
are not functional. 3) For use with this projector, do not connect both composite video
and S-video signals to the Composite / S-Video Input Module–connect one or the
other, even when plugged into a switcher.
'
This module can display digital video input signals conforming to the DVI (Digital
Visual Interface) single-channel standard.
Features
◊
supports Digital Visual Interface (DVI) single-channel
◊
supports VESA Extended Display Identification Data (EDID)
◊
provides an active-loop-through using a DVI connector (conforming to
the DVI Specification)
Appendix F: Optional Input Modules
INPUT 3 INPUT 4
/ . 2) The audio connectors
Ω
User's Manual F-3