Christie DS4K User Manual page 31

means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
To control a specific projector with the keypad, press
number assigned to the projector you want to use. If you switch to a projector other
than the one you are currently using, the checkmark will disappear.
To broadcast to multiple projectors, press
projector number. Keypad commands will then affect all projectors present. Note that
there is no method of controlling a group of projectors within the same wired
configuration using the wired keypad exclusively, since there is only one wired
protocol available.
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. See 3.6, Adjusting System Parameters
and Advanced Controls.
Enter
Press
adjustment and return to the previous menu or image.
Exit
Exit
Press
NOTE:
editing of a slidebar value) or within pull-down lists. It acts as a "cancel" in these
cases.
Arrow Keys
Use the
within a pull-down list without having to first scroll through options. See also Editing
Text later in Section 3.
Use the
Lens Focus, Zoom and Lens H, Lens V
Focus Zoom Lens H Lens V
, , ,
When adjusting the image for focus, zoom, horizontal and vertical positioning, use the
specific arrow keys (
window will appear to indicate the type of adjustment taking place. For example,
Press
to select a highlighted item, to toggle a checkbox, or to accept a parameter
to return to the previous level, such as the previous menu.
Exit
does not save changes within text editing boxes (including number
Exit
keys to change a slidebar value or to select a different option
keys to navigate within a menu, pull-down list or text box.
/
•
Use the "Focus"
•
Use the "Zoom" "
•
Use the "Lens H" "
still keeping it rectangular.
•
Use the "Lens V"
keeping it rectangular.
to return to presentation level.
Exit
Proj
and then
or / ) related to each function. A small
or keys to improve image clarity as desired.
or keys to achieve a desired image size.
or keys to position the image horizontally while
or keys to position the image vertically while still
Section 3: Operation
Proj
and then enter the 3-digit
Proj
again without entering a
User's Manual 3-9
.