Table of Contents
Advertisement
Section 2: Installation and Setup
Figure 2.8. Connecting RGB and Sync
NOTES: 1) If for some reason the projector fails to recognize a signal as an RGB
signal, specify this Color Space option within the Image Settings menu. See 3.5
Adjusting the Image. 2) To connect YPbPr signals–such as from DVDs or analog HDTV
INPUT 1
sources–to
, use the red, green and blue BNCs as described in YPbPr Signals
(below).
'
INPUT 1
INPUT 2
YPbPr Signals
Connect a YPbPr signal (component video) to
or
as shown in Figure
(COMPONENT VIDEO)
2.9.
NOTES: 1) If, for some reason, the projector fails to recognize a YPbPr signal,
specify this Color Space option within the Image Settings menu. See 3.5, Adjusting
INPUT
the Image. 2) Do not connect digital component signals (known as YCbCr) to
1
INPUT 5
INPUT 6
. Install an appropriate optional module in
or
for this.
Figure 2.9. Connecting YPbPr sources
User's Manual
2-13
.
Advertisement
Table of Contents
