Christie DS4K User Manual page 57

Professional 3-chip projectors
Table of Contents

Advertisement

Section 3: Operation
Menu Preferences
— SUBMENU
Use the options in this submenu to
adjust the appearance, content
and/or location of on-screen
menus and messages.
Enter a
LARGE MENU FONT —
checkmark to enlarge menus and
their text. You may have to adjust
"Menu Location" to accommodate
the increased menu area.
Use the pull-down list to choose a pre-defined default or
MENU LOCATION —
customized location for the display of all on-screen menus.
To create a custom menu location quickly, choose a preset that is closest to the desired
location. Then adjust "Horizontal Shift" and "Vertical Shift"slidebars to move the
menu to the desired location. Avoid locations too close to a corner or edge to prevent
cropping of larger menus.
Shift your menus as desired, creating a
HORIZONTAL SHIFT AND VERTICAL SHIFT —
customized menu location.
Enter a checkmark if you want to see a scrollable channel
DISPLAY CHANNEL LIST —
list whenever you press
from your presentation. Channels marked with a list icon
Channel
in the Channel Setup menu will appear here. The "Display Channel List" option
also enables on-screen feedback when using the
key. If you prefer to hide the
Input
channel list and input dialog box while switching channels and sources during a
presentation, clear the checkbox.
NOTE: The Channel List and input dialog box cannot be hidden during use of the
menus.
Enter a checkmark to superimpose a small slidebar over the
DISPLAY SLIDEBARS —
current image whenever an adjustable parameter is selected directly with a key such as
or
. If "Display Slidebars" is unchecked, these slidebars can still be
Bright
Contrast
accessed, but will be hidden during adjustment. This option does not affect slidebars
in menus.
Choose in what way you want to be notified of errors
DISPLAY ERROR MESSAGES —
detected in either the incoming signal or projector. Select "Screen" or "All" to see a
brief on-screen message or select "RS232" to receive messages via RS232 (or RS422)
serial communication only. Select "Off" to hide error message displays.
User's Manual
3-35
.

Advertisement

Table of Contents
loading

Table of Contents