Christie DS4K User Manual page 46

Section 3: Operation
Image Settings Menu
3-24
BLANKING (TOP, BOTTOM, LEFT, and
Crop the image as desired so
RIGHT):
that unwanted edges are removed from
the display (changed to black—see
right). Blanking defines the size of the
Active Input Window, or area of
interest. Range of adjustment depends
on the source resolution and other
factors.
PLUG & DISPLAY (EDID):
source outputs a signal according to the EDID information
provided by the projector. To override this information and
display in a different format (for example, if your Plug &
Play [EDID] device does not support the projector's
resolution and/or frequency), select the desired Plug & Play
(EDID) resolution from the list.
Any daisy-chained projectors will also display according to
the chosen Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
'
Use options in the Image
Settings menu to alter your
image without affecting its
size or position. Changes
made to the Image Settings
menu are applied
immediately and are saved
when you exit the menu
Exit
Menu
(press or
not available for the projector
model or source are disabled
and appear dim (gray).
By default, a Plug & Play (EDID)
). Options
User's Manual